Esky Scale RC 3D Scale Helicopter RTF Radio Controlled RC Helicopter
To find out more, Click Here!
The new Champion helicopter, fabricated with glass fiber and processed by spray-painting, has stunning colors and high glossiness. This new Champion is equipped with a high performance brushless motor , brushless speed controller, a high capacity 11.1V 1800mah 20C Li-Po battery, and a durable fiberglass scale fuselage. All spare parts are available from XHeli.com. The Scale Fuselage requires user to fit together. Included Fiberglass Fuselage DOES NOT come assembled. Helicopter Frame is 100% Built-Ready-to-Fly. Feature: 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob High performance 3800KV brushless motor used as the main drive Powerful 11.1V 1800mAh 20C high capacitance Li-Po battery provide enough power for any aerobatic flight Strong lightweight Main Blades, Tail Blades, and Flybar Paddles Improved Body Frame (Strong & Light) Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing Perfect for people who wants to move up from 4ch helicopter Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds O-ring inside the center hub reduce oscillation of main blades The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage Hard, Light weight Main Blades Brand new design for the structure Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying Tail rotor driven by belt provide stable flight and low noise NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter No need to worry about burning tail motors Light and hardened wood blades provide great lift, only weight 11g Outer placed professional gyro With length-adjustable servo push-rod, precision sub trim can be easily set Extended tail boom, reduced the load of tail motor Separate main shaft and main gear reduce repair time and noise Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and
Esky Scale RC 3D Scale Helicopter RTF Radio Controlled RC Helicopter
To find out more, Click Here!
No comments:
Post a Comment